See Printer-Friendly Version
Download PDF File

SECTION 1 - PRODUCT IDENTIFICATION

Product Name:
Membrane Cleaner

24-Hour Emergency Telephone Number:
800-424-9300 CHEMTREC

Chemical Name/Synonyms:
Solvent Naptha (Petroleum), Light Aliphatic

Manufacturer's Name:
Water Tight Technologies, LLC

Chemical Family:
Hydrocarbon Solvent

Manufacturer's Address:
P.O. Box 899 Payson, AZ  85547

Chemical Formula:
Not Established

NFPA Acute Hazard Rating: 
Health 2, Flammability 3, Reactivity 0
HMIS Acute Hazard Rating:
Health 2, Flammability 3, Reactivity 0

SECTION 2 - CHEMICAL COMPOSITION

Ingredient Components (chemical names)

OSHA (1910.1200)

Case No.

% (by weight)

Exposure Limits:

Aliphatic Petroleum Distillates

Naptha

64742-89-8

100

Pel 500 ppm
TLV 300 ppm
(based on TLV for VM & P Naptha).

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS

Appearance/Odor:
Thin, clear liquid, aliphatic odor

Physical State:
Liquid

Solubility in Water:
Negligible

Boiling Point:
247 - 282˚F

Specific Gravity (H₂O=1):
0.715-0.791

Melting Point:
N/A

Vapor Pressure:
@100˚F: 26.0 mm Hg

Vapor Density (Air=1):
3.8

Freezing Point:
Not Established

Percent Volatiles:
100%

Evaporation Rate:
Benzene: <.01%
(Butyl Acetate = 1): 1.2

Reactivity in Water:
N/A

pH (Full Strength):
Not Established

pH (Recommended Dilution):
Not Established

Refraction Index:
N/A

SECTION 4 - FIRE & EXPLOSION HAZARD DATA

Flash Point:
55˚F TCC

Flammable Limits (in air):
LEL: 1.0%; UEL: 7%

Extinguishing Media:
Dry chemical, carbon dioxide, water fog or foam. Do not use a direct water stream. Product will float and can re-ignite.

Fire Fighting Procedures:
Use water spray to cool adjacent surfaces and fire exposed containers. Protect against inhalation of combustion products.

Hazardous Decomposition Products:
Carbon Dioxide, Carbon Monoxide, acrid smoke and irritating fumes.

Special Fire & Explosion Hazards:
Flammable liquid. Vapors are heavier than air and can flow along surfaces to ignition sources and flash-back. Keep work areas free from open flames, sparks, hot metal surfaces and other sources of ignition. Ground objects prone to static electricity.

Method Used:
TCC

Auto-Ignition Temperature:
Not Established

SECTION 5 - HEALTH HAZARD DATA

Permissible Exposure Limit:
Not Established

Signs and Symptoms of Exposure:
Dizziness, nausea or vomiting. Sensitive individuals may exhibit eye, nose, throat or dermal irritation with prolonged exposure to processing fumes or vapors.

Effects of Overexposure:
Medical Conditions Aggravated By Exposure
Toxic fumes may be released during fire. Exposure to fumes may aggravate pre-existing eye, lung, and skin conditions.

Acute:

Chemical Listed as a Carcinogen (or Potential Carcinogen):

National Toxicology Program:  NO
L.A.R.C. Monographs: NO
OSHA: NO

Chronic:

Emergency & First Aid Procedures:

Eye Contact:
Flush with water and call physician

Skin Contact:
Clean with rubbing alcohol, followed by soap and water.

Inhalation:
Remove to fresh air. Administer oxygen or artificial respiration, if necessary. Call physician.

Ingestion:
Consult a Physician. DO NOT INDUCE VOMITING

Primary Route of Entry:
Inhalation

SECTION 6 - REACTIVITY DATA

Stability:
Stable at ambient temperatures and pressures.

Incompatibility:
Strong oxidizers, acids, bases.

Hazardous Decomposition Products:
Toxic gases or vapors, such as oxides of carbon and nitrogen along with trace of HCL may be released during a fire.

Hazardous Polymerization:
N/A

Conditions to Avoid:
Open flames and sparks. Closed areas that restrict adequate ventilation.

SECTION 7 - SPILL OR LEAK PROCEDURES

Steps to be taken in case material is released or spilled:

Small spill:
Absorb using inert material. Use non-sparking tools. Transfer into secure containers for proper disposal. Use personal protective equipment as outlined below.

Large Spill:
Same as small spill.

Waste Disposal Method:
Dispose of as a hazardous waste in accordance with EPA/RCRA regulations 40CFR261 21(a) (1) Ignitability: D001

SECTION 8 - SPECIAL PROTECTION

Respiratory Protection:
Use NIOSH-Certified respiratory protection for organic vapor if necessary.

Eye Protection:
Impervious safety glasses with side shields recommended.

Protective Gloves:
Impervious gloves are recommended to prevent skin contact.

Other Protective Equipment:
Under normal application conditions, protective glasses, gloves, and clothing are adequate.

Ventilation:
Provide adequate ventilation to maintain airborne concentrations below OSHA PELs.

SECTION 9 - SPECIAL PRECAUTIONS OR OTHER COMMENTS

Storage/Handling:
  Store in cool, dry, well ventilated facility.  Store and use away from all sources of direct heat and ignition. Keep containers closed when not in use.

Other Precautions:
Provide adequate ventilation and avoid prolonged or repeated contact with the skin. Wash with soap and water after contact.

Work/Hygienic Practices:
Maintain good personal hygiene practices. Wash contaminated clothing before reuse. Do not eat, drink, or smoke in work areas. Wash exposed skin before eating, drinking, smoking, or applying cosmetics.

SECTION 10 - TRANSPORTATION

Regulatory Agency:
U.S.A., DOT, IMO

Identification Number:
UN 1268

Proper Shipping Name:
Petroleum Distillates, N.O.S.

Labels Required:
Flammable Liquid

Hazard Classification:
3

Other Requirements:

Packing Group:

SECTION 11 – MISCELLANEOUS INFORMATION

Additional Comments:
None

Date of Previous MSDS:
August 2000

Changes Since Previous MSDS:
Comment change in sections:  1 thru 9
Add sections: 10,11

Telephone Number for Additional Information:
(574) 293-9096

DISCLAIMER

The information contained herein is based on data considered accurate which has been obtained from other companies and organizations. However, no warranty or representation is expressed or implied that the information is accurate, complete, or representative. Water Tight Technologies, LLC assumes no responsibility for injury to the buyer, the buyer’s employees, or any third persons if reasonable safety procedures are not followed.